SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklifts
Used Parts for Forklifts - Without doubt, lift truck components would eventually wear out and require replacing. The alternative of acquiring new parts can become costly so another idea is to purchase used parts. This could save a lot of money in the long run. It is a good idea to obtain used lift truck components that have been reproduced. These components would guarantee that you are getting parts which would work for a long time and be productive.
Broken or worn parts which are remanufactured are a cheaper answer compared to rebuilding. With rebuilding parts, just the parts that are broken or worn out get changed, which means that other wearable components might break down soon after purchase.
Remanufactured components are cleaned after being taken apart and have the unusable components replaced. This method could provide the best assurance for second-hand parts. All wearable parts are replaced regardless of age or wear which is another rationale why reproduced parts in general operate so much better. Whichever part within the part is new and this offers far longer life to the used part. Depending on the forklift components which are being redone, the cleaning process and the entire remanufacturing process will vary.
After complete disassembly, the engines are oven cleaned. Several parts of the engine like rings, pistons, spark plugs, valves, valve springs, and filters can be replaced during the remanufacture process. The engines are hot tested after reassembly to ensure that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are another item which is oven cleaned after being disassembled. The transmission is then pressure washed. A comprehensive inspection is done to check for any cracks. Seals, bearings and bushings are all replaced. Typically, the replacement components utilized on transmission parts meet OEM specifications.
A few forklift components like for instance the alternator, the water pump, torque converters, the starter and steer axles can be quite serviceable after worn parts are replaced. The electronic control in the electric forklift is maintained by the control card. This particular card can even be remanufactured with replacing all aged and worn out components. Unlike other lift truck parts the control card could only have the worn and aged parts replaced.
Remanufactured components are meticulously examined upon reassembly to guarantee they are in top condition prior to being sold. It is essential when purchasing remanufactured components to make certain they have undergone the proper testing and inspection procedures. On certain bigger components like for instance engines, transmissions and steer axles, OEM specification replacement parts must be utilized.
The forklift dealer could ensure that the components they have remanufactured meet the OEM specifications. This will likewise ensure the components meet industry standards. Many details go into remanufacturing second-hand parts. This attention to detail provides more serviceability out of reproduced parts compared to the components that were merely rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Irving, Texas
forkliftpartsirving.com
Email Us
About Us